Wel Come All. It gives me a great pleasure to announce CAD Job Center a job ref. blog, offering you quality and quantitative jobs in Design and Research (CAD/CAM/CAE) in top OEM's like (TATA, Mahindra, Maruti, John Deere, Bajaj, Claas India, Honda, Escort, Volvo, Renault, SML ISUZU (Swaraj Mazda), LG, Robert Bosch, Ashok Leyland, Honeywell, Hero Cycle, General Electrical, General Motors, Mercedes-Benz, Stryker, Airbus) and many more. You just check the opening here and forward your resume in response to the opening. If you like this blog, Don't forget to share this blog with your friends and help them to get their Dream Job.
Design and Research Jobs in India (CAD/CAM/CAE)

CAD Job Search Tool

Friday, October 30, 2009

Urgent Opening for Maruti Udyog (Gurgaon)

Dear,

Greetings of the day !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


We are having several openings in Design Department in Maruti Udyog, So if you are interested you can contact undersigned or you can revert on the same ID.

Following are the openings:
Design Engineer for BIW, Interiors & Exteriors
(Doors, Handle, Seats, Cabin, Trims)

Note: Designation according to Experience and Profile
Minimum Experience: 3 Yrs

The updated profile should include the following:

Your Key Skills / Strengths
Required minimum 60% in Xth , XIIth and in B.E./B.Tech
Current Designation, Company name & Role
Details of relevant experience & achievements, names of companies worked for & duration and period
Educational & Professional Qualifications, names of Institute/schools and duration / year of passing, percentage
Current & expected compensation (Cost to the company)
Contact phone numbers (mobile, home & Work) and email ID
Some comments about the kind of position you are interested in.

It will be helpful if your email should have the Subject as "ALKA (Design)

With best regards,

Alka Chugh (9311258008)
Super Pioneer Personnel Network (P) Limited
(A Division Of Super Consultancy Services)
Off:84 Defence Enclave, Opp. Petrol Pump ,Preet Vihar
Vikas Marg, Delhi-11092 ph:011122456827,22015386
Email- alka@superconsultancy.com



Don't forget to share this Job with your friends and lets help them to grab their Dream Job.

Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Call urgently for job offer at John Deere

Dear,

Kindly call urgently for a job opening for Operator's Station Engineer (Design) for John Deere Technology Center-India, Pune.

Neelambari Ghare
HR - Talent Acquisition
John Deere Technology Center-India, Pune
Cybercity, Magarpatta City, Hadapsar
Pune - 411013, India
E mail - ghareneelambari@johndeere.com
Tel No. : 020-66425000 - (phone extension - 1478)



Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Wednesday, October 28, 2009

Multiple vacancies for Trims Engineer for Mahindra Engg Services, Mumbai

Dear,

We have multiple vacancies for Trims Engineer for Mahindra Engineering Services Ltd.

The location of posting will be in OEM at Kandivli, Mumbai.


Job Profile -

Qualification: Diploma/BE/ME - Mechanical/Automobile / Plastic Engineering

Experience : 3 - 8 yrs experience

RESPONSIBILITY:

To design the trim parts & assemblies as per the given specifications & requirements on performance & weights within the stipulated project timelines.

KEY DELIVERABLES:

Designing & modifying trim parts (interior & exterior) to achieve its function & requirements (including homologation).
Expert in CAD (Catia V5) skills for making concepts & good surfaces. Understanding of surface parameters & quality.
Designing to be done with consideration of interface packaging, manufacturing, assembly, servicing (field) aspects. To make Assembly and assembly simulations (where ever required)
To release the design data in the system as per required product data management system within project timeline Creation of Drawings & 3D annotations with proper GD&T and datum points in Catia V5 and Release it for Production.
To co-ordinate and keep the DFMEA document completed & updated as per design progress


Please confirm your availability to us imme. if interested stating -

Your willingness to relocate to Mumbai
Your current location
Your current and expected CTC (gross salary)
Your updated resume in word format
No of hours of catia v5 experience
Your contact no.
Whether you have a bond with your current company
What is the notice period in your current company
Whether you have been interviewed by Mahindra before and if so when.

Please reply back with the same subject as in this email.

Sub:- Multiple vacancies for Trims Engineer for Mahindra Engg Services, Mumbai

Thanking you,
Best Regards,
Manjiri Dalvi
SYSTEMS MECHATRONIC
(sysmech@systemsmechatronic.com)


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Automotive, Aerospace, IT Industry & Mechanical related Jobs

Hi,

Anybody looking for good break in Automotive / Aerospace, IT Industry & Mechanical related Jobs,

Pls send your CV to mahadev@msmcad.com



Thanks & Regards
Mahadev
mahadev@msmcad.com

Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Thursday, October 22, 2009

Excellent Job Opportunity in Reputed MNC in Pune

Hi,
I am Prajakta from Hr Solutions. At Present we Have openings for Reputed MNC. Job Location wiil be Pune.

Job Description is as Follows :

Experience : 3 to 5 yrs
Qualification : Min BE(Mech)
Required Common Skills :

Pro/E
GD & T
DFMEA
CAD Skills
Excellent Knowledge of Manufacturing Processes
Sheetmetal fabricated parts
Chassis
Vehicle Integration
Suspension
Front Axle
Packaging
Front Axle and Suspension
Vehicle dynamics
Vehicle Integration
structural designs
Reliability

So if you are interested in this opening pls send your updated CV on prajakta@hrworksindia.com.

Thanks & Regards,

Prajakta Duraphe.
Resourcing Executive
Le Human Resource Solutions Pvt.Ltd
An ISO 9001-2000 Company
Shivajinagar, Pune-411005
Phone - 020 - 65003686
www.hrworksindia.com

Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Wednesday, October 21, 2009

EXCELLENT JOB OPENING WITH WORLD LEADER IN COMMERCIAL VEHICLES FOR GREENFIELD PLANT @ CHENNAI

Dear Candidate,

Greetings from Rujas Management Consultants Pvt. Ltd. An Auto OEM Talent Acquisition Specialist catering to the very best of MNC Auto OEM India.

This mail is being sent to you are there are some VERY URGENT!!! Openings with Auto OEM Commercial Vehicle client based @ CHENNAI. This is a Greenfield project with their launch of the HCV by December 2010 & their LCV launch by June 2010.

JOB OVERVIEW :

Experience needed : Preferably from Commercial Vehicle Industry / Any Auto OEM. Passenger Cars

We have openings in the following areas. Please SEND CV only with the JOB CODE.

LCV/HCV/MCV GROUP : Manager / Sr. Manager / DGM BE with 5 to 20+ yrs exp. Please send your resumes to : RMC3@RUJAS.COM

Design & Development of Entire Vehicle Integration including commercial Vehicle Sub systems. JOB CODE: ENTIRE VEHICLE

Cabin Design & development of latest generation Cabin including BIW, Interiors, Exteriors, Cockpit, etc. for HCV or LCV cabin. JOB CODE: CABIN

Chassis : Design & Develop Commercial Vehicle Chassis for either LCV or HCV applications. JOB CODE: CHASSIS

Documentation: JOB CODE: DOC

Calculation / CAE : JOB CODE : CAE

We have MORE THAN 150 OPENINGS IN R&D with our client

Many Thanks & Best Regards,
Muthuselvi
Consulting Team
Rujas Management Consultants Pvt. Ltd
AUTO OEM & TIER -1 SPECIALISED SEARCH & PLACEMENT
E: rmc3@rujas.com

Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Wednesday, October 14, 2009

Job for Rear Axle Suspension in MERCEDES BENZ,Pune

Hello,


We have the following vacancy and the details are given below:

Company Name: MERCEDES BENZ,

Company Details:
Mercedes-Benz has been associated with India for more than 50 years. Presently, Mercedes-Benz India engagement in India covers several domains:
Local production of Mercedes-Benz cars
Making available imported Mercedes-Benz cars
Commercial Vehicle operations,
Global sourcing of auto components
Captive automotive technology research and development
Social Involvement of Mercedes-Benz
Mercedes-Benz is also involved with social-oriented programs across India like:
Biofuel from Jatropha
Road safety project for children
Automotive education, etc.


Company Website: www.mercedes-benz.co.in

Designation: Rear Axle Suspension

Qualification: BE/ BTech

Years of exp: Above 2 years of experience in CAD and Truck and Suspension systems (Front/ Rear)

Location: Pune

Salary: Negotiable

Job Description: Skill Requirements
CATIA V5 skills are a must
Know how to design and define strain profile of : Casted parts, stamped parts, forged parts
Strong Communication skills

Job Responsibilities
Design of rear suspension systems and aggregates in CATIA V5
Ensure communication with business partners

If your profile matches the above requirement and if you are interested in the above opening kindly email your resume at the earliest as word doc attachment to sanjana@talenttrack.co.in without changing the subject line.

Sub: Job for Rear Axle Suspension in MERCEDES BENZ,Pune

Kindly let me know the following details
Current Salary
Expected Salary
Notice period (i.e. time required to join)
Yrs of experience
Please mention for which position you have applied

If the above requirement does not suit your profile kindly ignore the mail.

Have you send your application to the above company in last 6 months? Details
The above details are mandatory. CVs without these details will not be processed.

For any further clarification feel free to contact.

Regards,
Sanjana. Shet
Direct No: 080 - 42458504


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Tuesday, October 13, 2009

Multiple Job opening at General Motors (Bangalore)

Dear,

This is Sandeep from SG Solutions, Bangalore. This is regarding job opening at General Motors (Bangalore)...for Associate Sculptor

Location: Bangalore

Qualification: Bachelor Degree in Engineering with 1-2 years of relevant experience.


Post Associate Sculptor
Job Description Role Summary
General Motors India is one of the many global design centers of GM. It is actively involved in Design & Development of vehicles that General Motors designs for global and Indian Market. Associate Sculptor position based in GM India Design Studio will be part of Sculpting Team which works on modeling Exterior and Interior surfaces. Associate Sculptor will be responsible for Digital Modeling, Surfacing, Understand design language, design themes and implementation of chosen design themes.
Responsibilities
Planning, analyzing and create Digital Model.
Responsible for creating surfaces for exterior and interior.
Researching, benchmarking and making contextual inquiries of the competitor vehicles for all aspects of Interior, Exterior and Aerodynamic Design.
Adapting the given design language, theme or direction for another range of vehicle maintaining the same design Intent to develop new models.
Delivering Surfaces for production and analysis as per requirement.
Coordinating & participating collaboratively with design and CAE teams of other design studios while working on a vehicle development program.
Organizing, attending and documenting periodic conference calls while working with Design teams of other GM Studios.
Candidate Profile Skills & Experience
1-4 years of working experience; as a Surface modeler/ Product Designer/ Used Surfacing and Reverse engineering tools. Relevant CAD surfacing skills is preferred
Should have basic idea of patch planning and uses surfacing technique to accomplish Digital surfacing.
Working Knowledge of Alias, Imageware, ICEMSurf, Unigraphics or any other surfacing tool.
Quick Learner and adaptable to new tools.
Working knowledge of MS Office applications like Excel & Power Point is a must.
Good ability to communicate his ideas visually, verbally and in writing
Ability to adopt new ideas, influences and quick to react to changing trends & requirements
Education Requirements:
Bachelor Degree in Engineering with 1-2 years of relevant experience.
Location Position is based at GM India Design Studio - Bangalore



Kindly revert back with your updated resume ASAP to Sandeep_bg@sgsolutionsglobal.com and provide the following details

Total Yrs of Exp:
Relevant Yrs of Exp:
Current CTC(per annum in INR):
Expected CTC (per annum in INR):
Notice Period:


Thanks&Regards,
Sandeep
SG Solutions
Ph: 080-41425613 / 9448080987
Email id: sandeep_bg@sgsolutionsglobal.com


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Sunday, October 11, 2009

Urgent Opening for AM/DM VEHICLE TESTING in MAHINDRA & MAHINDRA AUTO ( NASHIK/CHENNAI)

Dear,

the HR service provider to the most leading MNCs (Automobile , Finance, Engineering & IT) in India.We have PAN INDIA OPERATION
plz send me ur updated cv as soon as possible & modify acc. to the job details if possible , and provide refrences if you have.
Pls send your Updated cv to explore to the GREAT CAREER OPPORTUNITIES.

Pls send ur cv on vikrant266@gmail.com

COMPANY - MAHINDRA &MAHINDRA AUTO
AM/DM VEHICLE TESTING ( NASHIK/CHENNAI)
JOB PROFILE

"JOB ROLE:
Having worked on devlopmental validtaion of atleat 3 or 4 automotive systems. e.g. Clutch, Brake, Tyres, Suspension, Transmission, Axles, body, electricals etc.
 Conducting on track and off track trials, validate prototypes to confirm system/vehicle performance and assist in developing performance
 Organize resources, infrastructure, vehicle test to ensure timely delivery and first time right by laisioining with the various agencies and inter departmental facilities
 Analyzing the test reports, review with the system engineers, superiors for he final desired output and suggest corrective actions
 Highlight and resolve concern areas, gaps and target confirmation to achieve the durability, reliability and functional signoff to achieve the set targets
 Develop evaluation and testing methodologies


POST 2
AM/DM VEHICLE DURABILITY

"JOB ROLE:
 Conduct on track or on road trials to ensure durability validation of the projects
  Develop new durability testing methodologies in view of accelerating the test as well as capturing new failure modes
 Organize resources, infrastructure, vehicle tests to ensure timely delivery & first time right by laisioining with the various agencies and inter departmental facilities
 Data analyzing the test reports, review with the system engineers, superiors for he final desired output and suggest corrective actions
 Highlight and resolve concern areas, gaps and target confirmation to achieve the durability, reliability and functional signoff to achieve the set targets
 Upkeep and development of infrastructure

"
AM/DM LAB TESTING

"JOB ROLE:
 Organize resources, infrastructure, vehicle tests to ensure timely delivery and first time right by laisioining with the various agencies and inter departmental facilities
 Conduct lab trials to ensure durability, reliability and performance of vehicle systems/components
Should have worked in automotive test labs and must have used one or more of followings, Servo hydraulic actuators, Pnuematic or elctric drive based test rigs.
Should have capability to visualise and develop customised test rigs/facilities
 Analyzing the test reports, review with the system engineers, superiors for the final desired output and suggest corrective actions
 Highlight and resolve concern areas, gaps and target confirmation to achieve the durability, reliability and functional signoff to achieve the set targets
 Develop evaluation and testing methodologies
 Upkeep and development of infrastructure

"


Thanks & Regards

Vicky (HR Manager - Auto Division) 9540760833


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Saturday, October 10, 2009

Req Unigraphics NX4/NX5 and BIW Fixtures specialized CAD Engineers

Candidates having 3+ years Exp in UG & BIW need to apply!
-----------------------------------------------------------------------
Hi,
I am Hema from Concurrent Engineering ,
we are having requirement for CAD Engineers specialized with
Unigraphics NX4/NX5 and BIW Fixtures for one of our Client Company.

The position details as follows,

Job Description:
-------------------
Position: CAD Engineer (BIW & UG)

Qualification: B.E./Diploma with good academic record

Experience: 3+ yrs

Job Location: Pune

Required Skills:
- More than 3 years of proven experience in BIW Fixtures.
- Experience in Product design will be added advantage
- Hands on experience of UG NX4/NX5
- Excellent customer service skills.
- Good communication skills: proficiency in English is essential.
- Familiar to international and multicultural working environments.
- Willing to travel abroad.

Company Details:
The company has two of its units certified by Govt., of India as
In-house R &D units. To augment its efforts in this direction
and achieve projected growth , it also has a design center
in Pune , to provide high quality Engineering services /
Solutions to existing as well new Domestic / Global clients.

If your profile is matching with this requirement send me your updated CV @ team1@concurrentgroup.com with the details of:

Total Experience:
Relevant Experience:
Present CTC:
Expected CTC:
Notice Period:

------------------------------------------------------------------------------------
Agency:
Concurrent Engineering Solutions Pvt. Ltd.
Bangalore - 86.
www.ConcurrentGroup.com
Ph.: 64500955 / 41136765
team1@concurrentgroup.com

Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Thursday, October 8, 2009

Urgent Opening for DANA -MNC

Hi,

We have following requirements for our client DANA India (website: - http://dana.com/).


Job Title: I-DEAS

Basic Skills: -
CAD/ Forgine / Casting/ background, preferably IDEAS/ CATIA

Desired Skill: -
Working experience in Automotive Vehicle Design mainly Axles and Drive shaft
Etc.Conversant with design processes and GD&T. Checking of PLM work.

Qualifications: -
BE/ D.M.E (Mechanical/ Automotive)

Required Experience: -
2 to 6 yrs.

Please send resume ASAP.

Thanks & Regards,
Maithili Kulkarni
9689947760
|Resource Management Group| Transcend Tech Pune.
|Voice: Direct : 020-66302647 Email: maithili@transcendtech.in


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Opportunity in Fuel Tank

Hi


Let me introduce Zito India as one of the leading Search & Selection Company in the country. We work with some of the leading names Globally.



We specialize in finding the right job for the right candidate. In a nut shell "Round Pegs for Round Holes"



Currently, we are conducting a urgent search for Asst. Manager / Dy Manager / Manager (Fuel Tank)

In case the opportunity excites you please reply back with your Latest CV via return mail.


With Warm Regards
zitoindia7@zitoindia.com

Zito India.
"Human Side Of Business"



Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Wednesday, October 7, 2009

Opening for Sr. Eng/Manager Transformer Design

Position : Sr. Eng / Manager
Location : Mumbai

Job profile :
Role in Transformer Design :
1. B.E/B.Tech in Mechanical Engineering from reputed Engineering college
2. Good expertise in 3D CAD software Unigraphics NX
3. Excellent communication skills in English
4. Willing to work in Mumbai and abroad
5. Transformer design knowledge preferred
6. Good Team player and ability to grow fast (HiPo)
7. Smart disposition

If Interested reply with Updated Profile & Current CTC

Regards,
Nirali
9726700756
nirali@rrspl.com


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Thursday, October 1, 2009

Urgent requirement in Front/Rear Axle Suspension system design with world's No1 Automobile company in Bangalore

Hi,

Greetings!!!

This is samik from Business Fundamental. Business Fundamental provides strategic level consulting in Brand Imaging, Talent Acquisition, HR Services, and Training & Development.

This mail is regarding a job opening in Front / Rear Axle Suspension system design with world's No1 Automobile company in Bangalore. Please find the job descriptions below.

Requirement Location: Bangalore

Job Specifications:Rear Axle Suspension

Education: BE or Masters in Mechanical Engineering or equivalent


Experience: 2-10 years of experience in CAD and Truck and Suspension systems (Front/ Rear)

Skill Requirements:

CATIA V5 skills are a must
FEM Calculation with CATIA
Know how to design and define strain profile of : Casted parts, stamped parts, forged parts
Strong Communication skills
Knowledge of German language is added advantage


Job Responsibilities

Design of rear suspension systems and aggregates in CATIA V5
Ensure communication with business partners

Note: If you are interested Please send your updated Profile mentioning the job name you are applying for in the subject line to msamik@businessfundamental.co.in along with the following details.

Current CTC
Expected CTC
Notice Period
Current Location
Total years of experience
Experience in Front / Rear Axle Suspension system design:
Experience in Catia V5:
Experience in any CAD Tool:
Knowledge in German Language:
Experience in OEM:
Experience in Trucks:
Ready to relocate to Bangalore


Regards,

Samik M
Business Fundamental Consulting (India) Pvt. Ltd.
# 594, 10th Main Road
5th Block Jayanagar
Bangalore 560 041
Ph: 080 40525556
msamik@businessfundamental.co.in
www.businessfundamental.co.in


Don't forget to share this Job with your friends and lets help them to grab their Dream Job.
Visit for more Design and Research Jobs in India (CAD/CAM/CAE)

Design and Research Jobs in India (CAD/CAM/CAE)
Updated Daily.


Make free Worldwide Phone Calls

Popular Jobs